Specifications

Start-up:

1. Add pucks to ﬂoating dispenser and open to setting 4.

2. Add 2 tablespoons (28 grams) of Arctic Pure

Refresh per 1000 litres (265 gallons) of water.

3. Add 1 tablespoon (14 grams) of Arctic Pure

SpaBoost per 1000 litres (265 gallons) of water.

4. Test the Chlorine level. Once the chlorine reads within the ideal range (1-3 ppm) turn tablet

dispenser down to 1 - 2 (more or less according to bather load).

5. Start the Boost Filtration mode to circulate the chemicals and do not use spa for two hours after

the mode ends.

Note: The above example is for a spa without an ozone system. If your spa is equipped with an

ozone system please contact your dealer for proper Chlorine levels.

Weekly:

1. Add pucks to ﬂoating dispenser and reset the setting if necessary.

2. Add 2 tablespoons (28 grams) of Arctic Pure

Refresh per 1000 litres (265 gallons) of water.

3. Wait at least one hour and add 1 tablespoon (14 grams) of Arctic Pure

Best Defence per 1000

litres (265 gallons) of water.

Important: Arctic Pure

Refresh signiﬁcantly reduces pH and TA. One hour after adding Arctic

Pure

Refresh test and adjust TA and pH as needed.

Bromine System:

Note: If you are planning to use your new spa right away, Peak Boost must be added ﬁrst. Follow direc-

tions for adding Peak Boost from this page.

1. Fill ﬂoating dispenser with pucks and open to setting 7.

2. Add 2 tablespoons (28 grams) of Arctic Pure

Refresh per 1000 litres (265 gallons) of water.

3. Add 2 1/2 tablespoons (35 grams) of Arctic Pure

Peak Boost per 1000 litres (265 gallons) of

water, to establish a Bromide reserve.

4. Test the Bromine level. Once bromine reads within the ideal range (3-5 ppm) turn tablet

dispenser down to 2 or 3 (more or less according to bather load).

Note: The above example is for a spa without an ozone system. If your spa is equipped with an ozone

system please contact your dealer for proper Bromine levels.

Weekly

1. Twice a week test and adjust Total Alkalinity, pH and Chlorine or Bromine levels.

In extreme cases of sources water with high minerals (such as some well water), add

1 tablespoon (14 grams) per 1000 litres (265 gallons) of Arctic Pure

Best Defence weekly.

Important: Arctic Pure

Refresh signiﬁcantly reduces pH and TA. One hour after adding Arctic

Pure

Refresh test and adjust TA and pH as needed.

The use of Clariﬁers and Foam inhibitors is not recommended with Arctic Pure

Disposable ﬁlters!