Specifications

18
18
40- Minute Filter Cycle Time-out:
During a Filter cycle, if an accessory (a pump, the blower, or the light) is used manually, the Filter
cycle is suspended the time the accessories are used. Once all accessories are turned off (whether
manually or by built-in timer), the Filtration cycle remains suspended for an extra 40 minutes.
When a Filtration cycle is suspended the Filtration cycle icon will blink.
Panel Lockout:
It is possible to lock out all the keys. This feature is helpful when young children could have
access to the keypad. To lock/unlock the keypad, simply press on the Pump #1 key for at
least 5 seconds.
There are 2 modes you can choose from, full lock, or the partial lock. Full lock means ALL keypad
functions are locked. Partial lock means only the basic functions of the spa remain use able.
(pumps, blower and light)
Locking Your Digital Control Pad:
Press and hold the Pump 1 key for 5 seconds. At that point the display will show, “LocP” with the
“P” representing Partial Lock. Keep key pressed for 5 more seconds, if you want to be in Full Lock
mode. The “LocF” message will be displayed.
When the Control is locked, all automatic functions of the system run as usual. However, when
a locked key is pressed, a “LocP” or “LocF” message will then be displayed for 1 second. To unlock
the keypad, simply press and hold Pump 1 key again for 5 seconds.
Inverting the Display:
It is possible to set the display so that it is readable from either inside or outside the spa. To do
this, just press and hold the Filter key for 5 seconds to invert the display. If a power-up occurs, the
display always returns to the default mode.
Temperature displayed in Fahrenheit or Celsius:
The temperature can be displayed in Fahrenheit or Celsius. Press and hold Light key for five
seconds, to toggle between ºF and ºC. Note that after a power-up the system always return to
default Fahrenheit display.
Boost Filtration mode:
Press and hold the Pump 2 key for 5 seconds to enable the Boost Filtration mode, Pump 1 high
speed and the ozonator will fun for 45 minutes. When enabled, the “BOO” message is displayed.
This mode is used to speed-up filtration after intensive use of the spas or to help mix chemical just
added in the spa.