Specification Sheet

Designed by ARCTIC
190328_r6_EN
Optimised for Static Pressure
During the development of the new P12 PWM PST CO,
special emphasis was placed on a focused airstream and thus
a high static pressure.
The fan guarantees extremely efficient cooling, even with
increased air resistance.
Therefore, the P12 PWM PST CO is particularly suitable for
use on heatsinks and radiators.
P12 PWM PST CO
Pressure-optimised 120 mm Fan with PWM PST for Continuous Operation
For Continous Operation
The premium quality Japanese dual ball bearing allows
continuous operation 24/7 without the slightest
compromise in performance.
Dust and high temperature are affecting this bearing a lot
less than generic sleeve or one ball bearings and thus make it
the perfect choice when reliability is essential.
Impeller
Steel shaft High precision Japan made
ball bearing & lubricant
200 to 1800 RPM regulated via PWM PST
With a wide range of regulation and the PWM Sharing
Technology (PST), the P12 PWM PST CO fan speed can be
controlled synchronously with all your other fans together.
This keeps noise at a minimum while guaranteeing maximum
cooling performance when needed.
More Efficient Technology
The motor is powered by a Neodym-Iron-Boron-Magnet
ring of the newest generation, which allows the new P12
PWM PST CO to run much more efficiently than its
predecessors.
This saves energy and lowers the coil temperature without
comprimising the performance.
Extended Life Span
A 10 °C lower motor temperature roughly
doubles the life span of a fan.
The new ARCTIC motor has a four times longer
service life through its low coil temperature.
Consequently, we have extended the warranty
to 10 years.
No-Name 120 mm Fan
(Typical DC-Motor)
P12 PWM PST CO
(New ARCTIC Motor)
34.4 °C
54.5 °C
Coil Temperature @ 22 °C
Ambient Temperature
F12
PWM PST CO
P12
PWM PST CO
0.08 A @ RPM1 800
0.24 A @ RPM1 350
Power Consumption