Specification Sheet

Pressure-optimised Gaming Fan with PWM PST120 mm
BioniX P120
Designed by ARCTIC
191023_r7_EN
200 to 2100 RPM regulated via PWM
With a wide range of regulation and the PWM Sharing
Technology (PST), the BioniX P120 fan speed can be
controlled synchronously with all your other fans together.
This keeps noise at a minimum while guaranteeing maximum
cooling performance when needed.
Lubricant Capsule
Lubricant
Impeller
Teflon Plate
Steel Shaft
Precision Bearing
High Quality Bearing
Thanks to an alloy/lubricant combination developed in
Germany, friction within the bearing is reduced and greater
efficiency is achieved. As a result, there is less heat
development as well as less bearing noise, which means you
can enjoy a longer service life from your fan.
More Efficient Technology
The motor is powered by a Neodym-Iron-Boron-Magnet
ring of the newest generation, which allows the new BioniX
P120 to run much more efficiently than its predecessors.
This saves energy and lowers the coil temperature without
comprimising the performance.
BioniX F120
BioniX P120
0.13 A @ 1 800 RPM
0.2 A @ 1 800 RPM
Power Consumption
Extended Life Span
A 10 °C lower motor temperature roughly
doubles the life span of a fan. The new ARCTIC
motor has a four times longer service life
through its low coil temperature. Consequently,
we have extended the warranty to 10 years.
No-Name 120 mm Fan
(Typical DC-Motor)
BioniX P120
(New ARCTIC Motor)
34 6 °C.
54 5 °C.
Coil Temperature @ 22 °C
Ambient Temperature
Optimised for Static Pressure
During the development of the new BioniX P120, special
emphasis was placed on a focused airstream and thus a high
static pressure. The fan guarantees extremely efficient
cooling, even with increased air resistance.
Therefore, the BioniX P120 is particularly suitable for use on
heatsinks and radiators.