Technical data

Onzen Technical Guide

1.12.6 Program Filtration & Onzen Seings

e Onzen Chlorine Production (Onzen Cycle Duration) seings need to be programmed:

e following steps provide guidance on how to program the Onzen system seings:

Steps to help Set Filtration & Onzen Seings

Step 1. Enter Filtration Options rough Topside Controller

Press the Filter buon (pump 5 on epics) to enter into

your ltration options. Your display will show “SE” and from

here you will be able to choose your seings.

Step 2. Ozone Cycle Duration rough Topside Controller

Press your Filter/Pump 5 buon again to display your

rst option. is is your Ozone Cycle Duration.

* Peak II only, if Peak 1 is installed ozone will run during ltration.

Step 3. Seing Ozone Duration rough Topside Controller

Use your arrow keys to select your Ozone Cycle

Duration. You can select from 1 to 24 hours per day.

Step 4. Enter Onzen Seings rough Topside Controller

Press your Filter/Pump 5 buon again until you see

0n02.

Your display will now show the seings for your Onzen system.