Technical data
17
Onzen Technical Guide
Steps to help Set Filtration & Onzen Seings Continued
You can move backwards through the seings by pressing the Pump 3 buon (Pump 4 on Epic series spas). e Pump
1 buon will allow you to exit without saving any changes. When you get to the end of the options, press the lter key
one last time to save changes and begin a lter cycle immediately. If you do not press the lter key again your changes
will be saved and the lter cycle will begin when you have programmed it to do so.
* Press your Filter/Pump 5 buon again to start the next cycles immediately (Pumps will purge for 20
seconds).
To EXIT without saving changes press Pump 1.
To SAVE & EXIT but not start the cycle simply let the display time out.
5