Technical data

Onzen Technical Guide

Is Sanitizer Being Produced and Delivered to Spa Water?

is test requires:

· e water temperature to be at least 80º F (27º C).

· e Filter Cycle Duration to be set to 00.

· Onzen Cycle Duration programmed to On 24. Onzen system will run for 24 hours per day.

Step 1. Set Filtration Cycle Time to Fd 00 (= No Filtration)

Press the Filter Cycle Key until SE is displayed.

e Filter Cycle Duration details “Fd” will be displayed “Fd XX” .

Use down arrow key to change the Filter Cycle

Duration to Fd 00.

is de-activates the ltration pump so you can see the mist of

gas bubbles produced by the Onzen System.

Step 2. Scroll to On (Onzen Duration) Seing

Scroll through the seings by pressing the Filter Cycle

key until it reads “On X ”. (“x” will be a value between

0 & 24).

Step 3. Change On Seing to On 24

Change On seing to On 24.

On 24 programs the Onzen system to produce sanitizer 24 hours daily.

Step 4. Scroll rough Seings

Continue scrolling through the seings by repeatedly pushing the

Filter Cycle key until the pack resets.