User's Manual
Table Of Contents
- Hub Installation Checklist – 6x60-degree
- Link Budget Parameters for 6x60 Hub
- Wireless Cable Modem Configuration – CXC150W
- W-CMTS BSR1000W Setup Guide
- Factory Settings BSR1000W
- Connecting to the BSR1000 CMTS
- Setting the System Passwords
- Configure the Ethernet IP Address
- Configure Cable IP Address
- Configure the CMTS
- Configure Downstream Port
- Configure Upstream Ports:
- Configure Basic Routing
- Save the Configuration
- Creating a static route from the server to the BSR1000
- Windows 2000 DHCP Server
- Time-of-Day Server Setup Guide
- BSR1000W SNMPc View and Community
- SolarWinds’ TFTP-Server
- Cable System Basics
- Reader Feedback
12. You must specify a bootfile for the registered modem to download.
a. Go the “Reservations” and highlight the reservation you wish to configure.
*Reservations for Motorola systems will have an IP address of 192.168.2.x
b. Click
on the tool bar.
c. In the “General” tab, check “067 Bootfile Name” and specify the new boot file.
Note: To prevent unauthorized modem into the network, remove option “067 Bootfile Name”
from the “Server Options” in step 2 (this is NOT the same as “Reservation Options”).
June 2003 Page 10-6