User's Manual

(2). Hardware Reset option for emergency use. (This is

not easy to operate, please use the 6-digits passcode

from the first registration step for software reset)

In some condition (lost owner's phone or new phone and forgot

you 6-digits passcode from setting steps), you can use physical

key to unlock the Electric Lock and do the Hardware Reset. After

hardware reset, it will reset passcode to default "000000".

Here are steps for these procedures:

Option 1: BAC31: Input Pin connect to sensor.

(Input Pin can detect the door position status)

Step1:

Use the physical key to unlock the Electric Lock. (Allow

you to access power source of BAC31 BLE Controller from the

inside)

Step2:

Remove power (unplug power adapter) in unlock position

and Apply power back within few seconds time period.

Fig-16