User's Manual

Step3:

After power up the BAC31,

You will

hear a long beeping

sound

for 2-3 seconds from BAC31 BLE Controller.

The Red

LED will start flashing. You have to lock and unlock the "Fail-

Safe / Fail-Secure / Electric Lock" at least twice within 2-3

seconds (Has to finish before beeping sound stop).

Step4: The BAC31 will perform "Hardware Reset" for you and

you will hear confirm beep; beep sound two times for completing

the Hardware reset. (The Hardware Reset only has 3 seconds

time window, if you do not complete within this time. The BAC31

BEL Controller will abort this procedure. You have to repeat

these steps again).

Option 2: Prefer Method. BAC31: Use the "Reset Button"

from BAC31.

(It will work with SI_Sensor pin connect or not)

Step1:

Use the physical key to unlock the Electric Lock. (Allow

you to access power source of BAC31 BLE Controller from the

inside)

Step2:

Remove power (unplug power adapter) in unlock position

and Apply power back within few seconds time period.