User's Manual

43
Step 2a: Allow EZSmart App to register (paring with lock from
App). During this time App will go to sleep for 60 seconds, stop
Bluetooth connection, Key Fob will use this time to do the paring
process.
Step 2b: Make sure Key Fob is on "OFF" position (Fig - 14).
Step 2c: In front of the EZSmart Lock (less than one inches, two
centimeter), press and hold Key Fob’s button (Fig-17) and turn
‘Power Switch’ to the left (on) at the same time. A rapid RED
flashing LED comes up (about 3 seconds), Key Fob is ready to
register with the EZSmart Lock.
Fig-17