CSI-HDMI Adapter Board for Raspberry Pi Camera Board Rev 1.
CSI-HDMI Adapter Board for Raspberry Pi Camera Board Table of Contents 1. Introduction ............................................................................................................................... 1 2. Feature & Specification .............................................................................................................. 1 3. Kit Content .................................................................................................................................
CSI-HDMI Adapter Board for Raspberry Pi Camera Board 1. Introduction The CSI-HDMI adapter board is designed for V1 and V2 Raspberry pi camera board to extend the camera over the long cables while keeping the high-speed CSI signals away from noise and interference. By using high speed HDMI cable, the camera can run over 10 meters, that high extend the usage of the Raspberry pi cameras.
CSI-HDMI Adapter Board for Raspberry Pi Camera Board 4. Headphone Jack Wiring Diagram 5. Assembly Instructions Assembly is simple but require precision to place and tighten the small M2 screws (4mm). To reproduce the setup shown on the first picture: 1 - Assemble the 80mm flat cable between the camera and board, watch carefully the picture for the side of the cable; the connections face away on the extension board and toward the camera.
CSI-HDMI Adapter Board for Raspberry Pi Camera Board 6. Mechanical Drawing 3 www.Arducam.
