User Guide

ArduCAM USB3 Camera Shield User Guide

Table 2 16-bit Camera Interface Pin Definition

(Connector Part Number: Harwin M50-4302045)

Pin No. PIN NAME TYPE Pin No. PIN NAME TYPE

1 VCC3.3 POWER 2 VCC3.3 POWER

3 GND Ground 4 GND Ground

5 SDATA Bi-directional

6 SCL Input

7 Data10 Input 8 Data12 Input

9 Data11 Input

10 Data13 Input

11 Data8 Input

12 Data6 Input

13 Data3 Input

14 Data0 Input

15 RST Output 16 Data4 Input

17 Data7 Input 18 Data9 Input

19 Reserved NC 20 STANDBY Output

21 Reserved NC 22 Reserved NC

23 Data14 Input 24 HREF Input

25 Reserved NC 26 VSYNC Input

27 Reserved NC 28 GND Ground

29 PCLK Input 30 GND Ground

31 Data1 Input 32 Data5 Input

33 Reserved NC 34 Data15 Input

35 Data2 Input 36 Reserved NC

37 Reserved NC 38 Reserved NC

39 Reserved NC 40 USB_RST Input

3 Device Driver Installation

Please download the device driver from github. The Windows device driver is located in

Drivers folder like WinXP, Win7 or Win10. In each driver folder there are x64 and x86 folders for

64bit and 32bit system respectively.

When install the driver on Windows, you might need to disable the Windows driver signature

by following the two video below:

https://youtu.be/71YAIw7_-kg

https://youtu.be/gOTkrFp8oM4

Plug in the USB cable to the camera and the host PC USB port, there is notification from the

lower right of the task bar. The auto installation of the driver will fail, so we have to install the

USB camera driver manually.