Datasheet

IMX219PQH5-C
96
18. Notes On Handling
1. Static charge prevention
Image sensors are easily damaged by static discharge. Before handling be sure to take the following
protective measures.
(1) Either handle bare handed or use non-chargeable gloves, clothes or material.
Also use conductive shoes.
(2) Use a wrist strap when handling directly.
(3) Install grounded conductive mats on the floor and working table to prevent the generation of static
electricity.
(4) Ionized air is recommended for discharge when handling image sensors.
(5) For the shipment of mounted boards, use boxes treated for the prevention of static charges.
2. Protection from dust and dirt
(1) Perform all work in a clean environment.
(2) Do not touch the chip surface with hand and make any object contact with it.
(3) Keep in a dedicated case to protect from dust and dirt. To prevent dew condensation, preheat or
precool when moving to a room with great temperature differences.
3. Others
(1) Do not expose to strong light (sun rays) for long periods, as the color filters of color devices will
be discolored.
(2) Exposure to high temperature or humidity will affect the characteristics. Accordingly avoid storage
or use in such conditions.
(3) This product is precision optical parts, so care should be taken not to apply excessive mechanical
shocks or force.
(4) Reliability assurance of this product should be ignored because it is a bare chip.
(5) Note that imaging characteristics of the sensor may be affected when approaching strong
electromagnetic wave or magnetic field during operation.
(6) Note that X-ray inspection may damage characteristics of the sensor.
(7) Note that the sensor may be damaged when using ultraviolet ray and infrared laser for mounting it.
(8) Note that image may be affected by the light leaked to optical black when using an infrared cut
filter that has transparency in near infrared ray area during shooting subjects with high luminance.