Datasheet

ManualsBrandsArduCAM ManualsMicrocontrollersPico4ML TinyML Dev Kit RP2040 Board w/ QVGA Camera, LCD, Audio, Reset Button

101

102

103

104

105

106

107

108

109

110

Table Of Contents

Offset Name Info

0x25c CH9_AL1_TRANS_COUNT_TRIG Alias for channel 9 TRANS_COUNT register

This is a trigger register (0xc). Writing a nonzero value will

reload the channel counter and start the channel.

0x260 CH9_AL2_CTRL Alias for channel 9 CTRL register

0x264 CH9_AL2_TRANS_COUNT Alias for channel 9 TRANS_COUNT register

0x268 CH9_AL2_READ_ADDR Alias for channel 9 READ_ADDR register

0x26c CH9_AL2_WRITE_ADDR_TRIG Alias for channel 9 WRITE_ADDR register

This is a trigger register (0xc). Writing a nonzero value will

reload the channel counter and start the channel.

0x270 CH9_AL3_CTRL Alias for channel 9 CTRL register

0x274 CH9_AL3_WRITE_ADDR Alias for channel 9 WRITE_ADDR register

0x278 CH9_AL3_TRANS_COUNT Alias for channel 9 TRANS_COUNT register

0x27c CH9_AL3_READ_ADDR_TRIG Alias for channel 9 READ_ADDR register

This is a trigger register (0xc). Writing a nonzero value will

reload the channel counter and start the channel.

0x280 CH10_READ_ADDR DMA Channel 10 Read Address pointer

0x284 CH10_WRITE_ADDR DMA Channel 10 Write Address pointer

0x288 CH10_TRANS_COUNT DMA Channel 10 Transfer Count

0x28c CH10_CTRL_TRIG DMA Channel 10 Control and Status

0x290 CH10_AL1_CTRL Alias for channel 10 CTRL register

0x294 CH10_AL1_READ_ADDR Alias for channel 10 READ_ADDR register

0x298 CH10_AL1_WRITE_ADDR Alias for channel 10 WRITE_ADDR register

0x29c CH10_AL1_TRANS_COUNT_TRIG Alias for channel 10 TRANS_COUNT register

This is a trigger register (0xc). Writing a nonzero value will

reload the channel counter and start the channel.

0x2a0 CH10_AL2_CTRL Alias for channel 10 CTRL register

0x2a4 CH10_AL2_TRANS_COUNT Alias for channel 10 TRANS_COUNT register

0x2a8 CH10_AL2_READ_ADDR Alias for channel 10 READ_ADDR register

0x2ac CH10_AL2_WRITE_ADDR_TRIG Alias for channel 10 WRITE_ADDR register

This is a trigger register (0xc). Writing a nonzero value will

reload the channel counter and start the channel.

0x2b0 CH10_AL3_CTRL Alias for channel 10 CTRL register

0x2b4 CH10_AL3_WRITE_ADDR Alias for channel 10 WRITE_ADDR register

0x2b8 CH10_AL3_TRANS_COUNT Alias for channel 10 TRANS_COUNT register

0x2bc CH10_AL3_READ_ADDR_TRIG Alias for channel 10 READ_ADDR register

This is a trigger register (0xc). Writing a nonzero value will

reload the channel counter and start the channel.

0x2c0 CH11_READ_ADDR DMA Channel 11 Read Address pointer

0x2c4 CH11_WRITE_ADDR DMA Channel 11 Write Address pointer

0x2c8 CH11_TRANS_COUNT DMA Channel 11 Transfer Count

RP2040 Datasheet

2.5. DMA 108