Datasheet

Bits Name Description Type Reset
23:20 Reserved. - - -
19 INTOPERI input signal to peripheral, after override is applied RO 0x0
18 Reserved. - - -
17 INFROMPAD input signal from pad, before override is applied RO 0x0
16:14 Reserved. - - -
13 OETOPAD output enable to pad after register override is applied RO 0x0
12 OEFROMPERI output enable from selected peripheral, before register
override is applied
RO 0x0
11:10 Reserved. - - -
9 OUTTOPAD output signal to pad after register override is applied RO 0x0
8 OUTFROMPERI output signal from selected peripheral, before register
override is applied
RO 0x0
7:0 Reserved. - - -
IO_BANK0: GPIO0_CTRL, GPIO1_CTRL, …, GPIO28_CTRL, GPIO29_CTRL
Registers
Offsets: 0x004, 0x00c, …, 0x0e4, 0x0ec
Description
GPIO control including function select and overrides.
Table 295.
GPIO0_CTRL,
GPIO1_CTRL, …,
GPIO28_CTRL,
GPIO29_CTRL
Registers
Bits Name Description Type Reset
31:30 Reserved. - - -
29:28 IRQOVER
0x0 → don’t invert the interrupt
0x1 → invert the interrupt
0x2 → drive interrupt low
0x3 → drive interrupt high
RW 0x0
27:18 Reserved. - - -
17:16 INOVER
0x0 → don’t invert the peri input
0x1 → invert the peri input
0x2 → drive peri input low
0x3 → drive peri input high
RW 0x0
15:14 Reserved. - - -
13:12 OEOVER
0x0 → drive output enable from peripheral signal selected
by funcsel
0x1 → drive output enable from inverse of peripheral
signal selected by funcsel
0x2 → disable output
0x3 → enable output
RW 0x0
11:10 Reserved. - - -
RP2040 Datasheet
2.19. GPIO 268