Datasheet

Description
GPIO control including function select and overrides.
Table 338.
GPIO_QSPI_SCLK_CTR
L,
GPIO_QSPI_SS_CTRL,
…,
GPIO_QSPI_SD2_CTRL,
GPIO_QSPI_SD3_CTRL
Registers
Bits Name Description Type Reset
31:30 Reserved. - - -
29:28 IRQOVER
0x0 → don’t invert the interrupt
0x1 → invert the interrupt
0x2 → drive interrupt low
0x3 → drive interrupt high
RW 0x0
27:18 Reserved. - - -
17:16 INOVER
0x0 → don’t invert the peri input
0x1 → invert the peri input
0x2 → drive peri input low
0x3 → drive peri input high
RW 0x0
15:14 Reserved. - - -
13:12 OEOVER
0x0 → drive output enable from peripheral signal selected
by funcsel
0x1 → drive output enable from inverse of peripheral
signal selected by funcsel
0x2 → disable output
0x3 → enable output
RW 0x0
11:10 Reserved. - - -
9:8 OUTOVER
0x0 → drive output from peripheral signal selected by
funcsel
0x1 → drive output from inverse of peripheral signal
selected by funcsel
0x2 → drive output low
0x3 → drive output high
RW 0x0
7:5 Reserved. - - -
4:0 FUNCSEL Function select. 31 == NULL. See GPIO function table for
available functions.
RW 0x1f
IO_QSPI: INTR Register
Offset: 0x30
Description
Raw Interrupts
Table 339. INTR
Register
Bits Name Description Type Reset
31:24 Reserved. - - -
23 GPIO_QSPI_SD3_EDGE_HIGH WC 0x0
22 GPIO_QSPI_SD3_EDGE_LOW WC 0x0
21 GPIO_QSPI_SD3_LEVEL_HIGH RO 0x0
20 GPIO_QSPI_SD3_LEVEL_LOW RO 0x0
19 GPIO_QSPI_SD2_EDGE_HIGH WC 0x0
18 GPIO_QSPI_SD2_EDGE_LOW WC 0x0
RP2040 Datasheet
2.19. GPIO 311