User Manual

Original User Manual – AREBOS 3in1 Kitchen Maschine 1500W
14
Troubleshooting
NO.
Troubles
Solution
1
The machine doesn't work.
- Check if the plug is in good contact with the socket.
- Check if the rise button spring back in place.
- Check if the machine works continuously more than 6
minutes, and wait until the motor cool down.
2
Noise in the mixing bowl when
working (the accessory
scraped the bowl).
- Check if the mixing bowl is properly installed.
- Check if the accessory installed properly on machine.
3
The pot cover doesn’t fit the
mixing bowl properly.
- Check if the pot cover placed on the machine properly.
- Check if the mixing bowl installed properly on machine
and locked correctly.
4
The machine doesn’t work on
certain speed.
- Check if the mark on speed knob correspond to the
speed silkscreen on housing.
- Rotate speed knob to 0, and re-check if the machine
works.
5
Movements when the
machine working.
- Check if the anti-slip feet fall off.
- Check if the machine is placed on a smooth and flat
tabletop.
6
The rise button didn’t spring
back in place after installing
the mixing bowl and pot
cover.
- Check if the pot cover placed on the machine properly.
- Check if the mixing bowl is properly installed.
INSTRUCTIONS:
• Before starting, prepare a tray to lay out the pasta once made.
• you can make the prepared pasta dough into various desired shapes with the noodle
attachment (29).
• After you have mounted the helix housing with attachments on the device as illustrated
above, cut the kneaded dough into bars / stripes, then put them into the feed tube of
helix housing one after another.
• Start the machine and set the speed, the noodle will be extruded from the output part.