User’s manual – AREBOS Bench drill 500W Bench drill 500 W AR-HE-TBM500 Please follow all security measures in this user’s manual to ensure a secure use. Thank you for trusting AREBOS.
User’s manual – AREBOS Bench drill 500W List of contents 1. Safety instructions .......................................................... 3 1.1 Explanation of the symbols ......................................................... 3 1.2 Safety rules ................................................................................. 4 1.3 Safety work area ......................................................................... 4 1.4 Precautions against accident hazards ........................................
User’s manual – AREBOS Bench drill 500W Please read and safe these instructions. Read through this user’s manual carefully before using this product. Protect yourself and others by observing all safety information, warnings and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference. 1. Safety instructions 1.
User’s manual – AREBOS Bench drill 500W Do not wear gloves. Do not wear long hair loose. Use a hair net. Watch your step! Laser beam! Do not look into the beam! 1.2 Safety rules • • • Keep all safety information and instructions for the future. The term "power tool" used in the safety instructions refers to mains operated power tools (with mains cable) and batteryoperated power tools (without mains cable). Warning! Read all safety notes and instructions.
User’s manual – AREBOS Bench drill 500W • • • • • • • • • • • • • • • • • • • • Connect it to a vacuum cleaner. If there are connections for dust extraction and collection, make sure that they are connected and used correctly. Do not use the cable for purposes for which it is not intended. Do not use the cable to disconnect the plug from the outlet. Protect the cable from heat, oil, and sharp edges. Secure the workpiece. Use clamping devices or a vice to hold the workpiece.
User’s manual – AREBOS Bench drill 500W • • • • • • • • • Break long drilling chips by interrupting the drilling process by briefly turning back the turning wheel. There is a risk of injury due to long drilling chips. Keep handles dry, clean and free of oil and grease. Greasy, oily handles are slippery and lead to loss of control. Use fixtures to clamp the workpiece. Do not machine workpieces that are too small to clamp.
User’s manual – AREBOS Bench drill 500W • Keep your hands away from the working area when the machine is in operation. Before carrying out any adjustment or maintenance work, switch off the machine and unplug it from the power supply. 2.
User’s manual – AREBOS Bench drill 500W 3.
User’s manual – AREBOS Bench drill 500W 4. Construction 4.1 Unpacking • • • • • • Open the packaging and carefully remove the device. Remove the packaging material and any packaging and transport locks (if present). Check that the scope of delivery is complete. Check the device and accessories for transport damage. If possible, keep the packaging until the end of the warranty period.
User’s manual – AREBOS Bench drill 500W 10
User’s manual – AREBOS Bench drill 500W 11
User’s manual – AREBOS Bench drill 500W 4.3 Clamping the drill bit 4.4 Spindle speed To set the speed of the drill, the belt drive is set to the respective "height". Open the belt case (see 2. Technical data; Fig. 6) by loosening the cross screw. The wing screw is loosened by hand between the motor and the switch for the laser, so that the belt relaxes. The belt can now easily be set to the desired speed. The device is reassembled in the reverse order.
User’s manual – AREBOS Bench drill 500W 4.
User’s manual – AREBOS Bench drill 500W 4.
User’s manual – AREBOS Bench drill 500W 15
User’s manual – AREBOS Bench drill 500W 4.7 Maintenance 5. Intended Use • • • The machine may only be used in a technically perfect condition and in compliance with all safety instructions. This device may only be used as intended. The manufacturer cannot be held responsible for any damage resulting from non-compliance with the provisions of the generally applicable regulations as well as the provisions of these instructions.
User’s manual – AREBOS Bench drill 500W • Even with proper use and compliance with all safety regulations, residual risks may still exist: - Noise emission - Dust emission - Hand-arm vibrations - Risk of burns - Tool and workpiece heat up during operation - Risk of injury - Sharp tools and workpiece edges 6. Putting into service 6.1 Before use • • • • • • • Check the on/off switch incl.
User’s manual – AREBOS Bench drill 500W 7. Inspection and maintenance plan Regular maintenance period Check safety equipment. Check V-belt and tighten if necessary. Lubricate the column and table with a thin layer of oil. Clean taper mandrel. Before each commissioning After each commissioning If necessary ✓ ✓ ✓ ✓ Clean the machine from drilling dust or metal chips. ✓ 8. Maintenance and Cleaning 8.
User’s manual – AREBOS Bench drill 500W 8.4 Storage • • • • Store the device and its accessories in a dark, dry and frost-free place that is inaccessible to children. The optimum storage temperature is between 5 and 30˚C. Keep the power tool in its original packaging. Cover the power tool to protect it from dust or moisture. Keep the operating instructions with the power tool. 9. Disposal instruction 9.
User’s manual – AREBOS Bench drill 500W EU Declaration of Conformity We, Canbolat Vertriebs GmbH, Gneisenaustraße 10-11, 97074 Würzburg, Germany, Hereby declare that the product named below, seen its design and construction as well as according to our sales, has been complied with the relevant and basic health and safety EU-requirements. Name of the product: Arebos Bench drill 500 W Art. Nr.: 4260551589867 Model Nr.
