User Manual

User’s Manual – AREBOS Nibbler machine 625 W
5
Technical specifications
Model
AR-HE-BN625
Rated power
625 W
Rated voltage/frequency
230 V / 50 Hz
Rotational speed, no load
1000 rpm
Cabe length
2 m
Cutting width
0.236 in (6 mm)
Cutting thickness
Steel metal sheet
0.1575 in (4 mm)
Stainless steel metal sheet
0.0984 in (2,5 mm)
Other metals (aluminium, copper)
0.1575 in (4 mm)
Plastics
0.1575 in (4 mm)
Min cutting diameter
11.81 in (300 mm)
Sound power level LwA
90.9 dB(A)
Uncertainty K
3 db(A)
Sound pressure level LpA
79.9 db(A)
Uncertainty K
3 db(A)
Vibration emission value ah
1.77 m/s²
Uncertainty K
1,5 m/s²
Weight
9.26 lbs (4,2 kg)
Dimensions without handle
11.81 x 3.15 x 13 in (30 x 8 x 33 cm)
Sound level for the operator may exceed 85 dB (A). Wear hearing protection!
Use
Principles of operation
Before first use
• Make sure that the supply voltage is conform with the voltage indicated on the device’s
name plate
• Before each connection of the power supply to the device check the switch position; the
switch must always be in “off” (“0”) position. If the switch is in “on” (“I”) position, the device
will start unintentionally upon energising which may lead to an accident!
• Check the condition of the power cord and plug. If the power cord or plug need replacement,
seek assistance from a qualified service organisation.
Switching On and Off
• Switching on: slide the switch (10) towards the working end of the device, keep sliding until
the switch locks.
• Switching off: press the rear end of the switch to release the lock - the switch will return to
off position.
Operation
• Attach two handles to the device. Properly fix the material to be cut. Hold the device with
both hands when using it. Switch the device on. Never slide the device onto the material
before it is switched on. When cutting keep the device perpendicularly to the material being