User Manual

User’s Manual – AREBOS Concrete Vibrator 580/800 W
3
Please read and save these instructions. Read through this user’s manual carefully before using
product. Protect yourself and others by observing all safety information, warnings and cautions.
Failure to comply with instructions could result in personal injury and/or damage to product or
property. Please retain instructions for future reference.
1. Safety instructions
• Before commencing any work shift, the operator must verify the effectiveness of the controls
and safety equipment, as well as the proper installation of the safety devices. Concrete
vibrators may only be operated with all protective devices. The effectiveness of the controls
must not be unauthorized influenced or removed.
Before putting the devices into operation, it is essential to read the corresponding
instructions!
• Concrete vibrators may only be operated as intended, taking into account the operating and
maintenance instructions, the generally accepted safety rules and the country-specific
regulations. The intended use is exclusively the compacting of concrete. Any other use of the
concrete vibrator is considered to be improper and is a matter to be responsible exclusively
by the operator.
1.1 Condition for operation
• Proper and safe operation of the device requires the following:
- Proper transport, storage, installation.
- Careful operation.
- Careful care and maintenance.
• The device may only be operated for compacting fresh concrete. The vibrating body must be
immersed in the fresh concrete.
1.2 Operational safety
• Observe the safety instructions and warnings on the device and in the operating instructions.
• Commission the device according to the operating instructions.
• Familiarize yourself with the work environment before starting work. These include the
following points:
- Obstacles in the area of work and traffic.
- Load capacity of the soil.
- Necessary securing of the construction site, in particular for public transport.
- Necessary protection of walls and ceilings.
- Possibilities of assistance in accidents.
• Keep the workplace clean and well lit.
• Do not work with the power tool in an explosive environment, near flammable liquids, gases
or dust. Power tools generate sparks that can ignite fumes and dust.
• Keep people and children away from the workplace while working with the power tool.
Distraction could make you lose control.
• Do not expose power tools to rain or damp environments. Penetrating water increases the
risk of electric shock.
• Never leave a running device without supervision!
• Operate the device only as intended and in perfect technical condition.
• Never put a device requiring maintenance or repair into operation.
• When using an extension cord, it must be undamaged and checked. You must immediately
replace extension cables with damages (e.g. cracks in the sheath) or loose connectors and