User Manual

User’s manual – AREBOS Demolition Hammer 1700W
3
Recommendations
1. The tool should be connected to a power source connected to earth. If your installation
needs an extension, make sure it is equipped with an earth plug.
2. Wear protection equipment (goggles, shoes, respiratory filters, gloves, etc.), avoid wearing
jewelry, attach long hair and wear close-fitting clothing.
3. Unplug your tool from the mains when you are not using it, when changing tools or for
maintenance.
4. Work in a clean and uncluttered workspace. Your work area should be correctly lit.
5. Store the tool in a dry place, far from sources of heat or of dangerous vapors (ideal: 10 to
15°C). Do not operate your tool near explosive or inflammable materials.
6. Work with tools in good condition and adapted to the task to undertake. This do-it-yourself
equipment should be used as such and should not be overloaded. The tool should always be
used with its additional handle (B) and firmly held with both hands.
7. Before each use, check the oil level, the tightening of screws, the correct mounting of the
drive spindle
8. Make sure of not driving into live parts or gas or water pipes, etc. You would risk
electrocution or an explosion. Detect any live or metallic parts before starting to work (for
example, a live wire in a wall with a metals detector)
9. Do not try to open or dismantle the tool pour to intervene by yourself. Only a competent and
Warning! Read the safety instructions carefully. Failure to follow the safety
precautions could result in serious injury or damage. Keep the operating
instructions in a safe place.
Insulated housing (protection class II)!
Take special care when using this article.
Warning! Wear protective gloves!
Warning! Wear safety glasses!