User Manual

User’s manual – AREBOS Demolition Hammer 1700W

protective hair covering to contain long hair.

• Use safety glasses. Use a face or dust mask as well if the operation is dusty or if using in

enclosed spaces.

• Do not abuse the cord. Never carry the tool by its cord or yank it to disconnect it from the

socket. Keep the cord away from heat, oil and sharp edges.

• Secure your work. Use clamps or a vice to hold your work. It is safer than using your hand

and it frees both hands to operate tool.

• Do not overreach. Keep proper footing and balance at all times.

• Maintain tools with care. Keep cutting tools sharp and clean for better and safer

performance. Follow instructions for lubricating and changing accessories. Inspect tool cords

periodically and if damaged have repaired by an authorized service facility. Inspect extension

cords periodically and replace if damaged. Keep handles dry, clean and free from oil and

grease.

• Disconnect tools. Disconnect when not in use, before servicing and when changing

accessories such as blades, bits and cutters.

• Remove adjusting keys and wrenches. From the habit of checking to see that keys and

adjusting wrenches are removed from the tool and replaced in the storage area before

switching on.

• Avoid unintentional starling. Do not carry a plugged-in tool with a finger on the switch.

Ensure the switch if off when plugging in.

• Use outdoor extension cords. When a tool is used outdoors, use only extension cords

intended for outdoor use and so marked.

• Stay alert. Watch what you are doing. Use common sense. Do not operate tools when you

are tired.

• Connect dust extraction equipment. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are connected and properly used, especially

in confined areas.

• Check damaged parts. Before further use of the tool, a guard or other part that is damaged

should be carefully checked to determine whether it will operate properly and perform its

intended function. Check for alignment of moving parts, free running of moving parts,

breakage of parts, mounting and any other conditions that may affect its operation. A guard

or other part that is damaged should be properly repaired or replaced by an authorized

service center unless otherwise indicated in this instruction manual. Have defective switches

replaced by an authorized service center. Do not use the tool if the switch does not turn it on

and off.

• Warning! The use of any accessory or attachment, other than recommended in this

instruction manual, may present a risk of personal injury.

• Have your tool repaired by a qualified person. This electrical tool is in accordance with the

relevant safety requirements. Repairs should only be carried out by qualified persons using

original spare parts, otherwise this may result in considerable danger to the user.