User`s manual

COMMAND LINE INTERFACE
58
5.4.3.3 Set Commands
If there is more than one SAS host adapters in the system (up
to 64 are supported), use this command to select the appro-
priate controller on which to perform an action. All actions or
commands will be performed only on the currently selected host
adapter.
To prepare a SAS host adapter to receive a CLI command, you
rst need to select the host adapter. To select the adapter and
prepare it to receive CLI commands. You can use the following
command to get the set command function and description.
CLI > set help [Enter]
Typical output looks like:
command function and description.
Syntax
CLI> main [Enter]