User`s manual

Installation Guide
42
Fan 03 Not-Installed
Fan 04 Not-Installed
Temperature Element (0x04):
========================================
NAME ID CT(‘C) HTW LTW OTWarn
ENC. Temp 01 32 60 5 No
Chip Temp 02 42 85 5 No
Voltage Element (0x12):
========================================
NAME VOLT(V) OVLMT UVLMT STATUS
1V 0.99 1.07 0.94 None
5V 4.96 5.32 4.63 None
PowerSupply Element (0x02):
========================================
NAME STATUS
PowerSupply01 OK
PowerSupply02 OK
AudibleAlarm Element (0x06):
========================================
NAME STATUS ALMSTATE
Audible-Alarm Normal 0
CLI>
• SHOWLOGS Command
The showlogs command allows you to display system event no-
tications that have been generated event by the SAS expander
box.
Syntax
CLI>showlogs [DisplayMode(hex, detail, default)]
Example:
CLI>showlogs
00000000-00000000:PLATFORM:Firmware initialization started
Day00000-00:00:00 ENCLOSURE-Fan 01 Failed