User`s manual

LCD Conguration Manager
25
• Alerts Menu
Show which device that fail to work, its sub-items could be
"Power Supply", "Fan", "Temp. Sensor" and "Voltage Sensor".
• Voltage
Show enclosure chip voltage in status data, represent in V.
The sub-items are shown as below:
1.2V- , the expander box voltage is 1.2V
5V- , the expander box voltage is 5V
For the setup item, the LCM key represent:
Up key to enter the 0 - 9 data.
Down key to enter "a" - "z" and "A" - "Z" data.
Enter key to conrm the input or ready to update a sub-item
data.
Esc/Exit key to go back to the main selection.
• Set Link
Set HDD devices maximun/minimun link speed rate. The value
could be 12G, 6G or 3G each of HDD devices link speed will
have the sub-items are shown as below:
_Set Max. Rate
12G
_Set Min. Rate
3G
• Set Alarm
Set enclosure buzzer warning/critical error beep style or mute
the current beep. The value could be "Sound 1", "Sound 2",
"Sound 3", "Sound 4" and "Sound Disabled". Sound 1 to 4 means
different frequency sound. Sound disabled means disable the
sound beep. The sub-items are shown below:
_Set Alarm Beep
Mute beep
_Warning Alarm
Sound 2
_Critical Alarm
Sound 3