User`s manual
CLI Manager
49
PowerSupply02 OK
AudibleAlarm Element (0x06):
========================================
NAME STATUS ALMSTATE
Audible-Alarm Normal 0
CLI>
• SHOWLOGS Command
The showlogs command allows you to display system event no-
tications that have been generated event by the SAS expander
box.
Syntax
CLI>showlogs [DisplayMode(hex, detail, default)]
Example:
CLI>showlogs
00000000-00000000:PLATFORM:Firmware initialization started
Day00000-00:00:00 ENCLOSURE-Fan 01 Failed
• FDL Command
The box has added the expander rmware update through the
CLI on the external RS-232 port. Before you process the rmware
update, there are two block regions that you can update expander
microcode on SAS expander box.
1. CODE region - for FW le : sas3xfwYYMMDD.fw
2. MFGB region - for Data le : mfg12gYYMMDD.dat
To update the expander controller rmware, follow the procedure
below:
Syntax: all the commands please type in lower case
CLI>fdl { code | mfgb }
Then use XModem/(Checksum) protocol transmit le to update
ROM Region. The following procedures is used to update rmware
through the RS-232: