Specifications

Page18of59|ArecontVisionAV200ManualRev1.1


If changes are made to theaddress, the screen will be followed by an individual confirmation of the IP address
changeandthetitleofeachcamerafoundonthenetwork.
Individualconfirmationscreensforeachcameracanbeskipped,
butthesoftwarewillchangethe IPaddressesof
eachcamerafoundwithoutconfirmation.
Tochangealltheaddressesandskiptotheendofthesetup process,checktheradiobuttoncalleddonotshow
infoforindividualcameras.
Clicknextandreceiveapop‐upconfirmationwindow
warningthatcameraIPaddresseswillbechanged.Clickyes
tocontinue.
IftheoptionforDonotshowinfoforindividualcamerasisselected,thewizardwilljumptothesummaryscreen.
IfDonotshowinfoforindividualcamerasisnotselected,thenextseriesofscreenswilldisplay
ascreenforeach
cameradiscovered.
TheModel,MACaddress,Firmware/Hardwareversion,andapreviewimagefromthecamerawillbedisplayed.