Specifications

Page28of59|ArecontVisionAV200ManualRev1.1

Alsovisibleforthe“Image”,“Exposure”and“Motiondetection”tabstospecifywhichcamerathetabcontrolsare
appliedto.
Bydefault,thecameranamewillbethecameramodelandthelasttwooctetsofthecameraMACaddress.
DefaulttitleformatCameraModel[**:**].Cameranamescanbechangedduringinitialsetupthroughthesystem
setupwizard,onindividualcamerapagesorbyleftclickingonceontheselectedcameratitleintheCamera Tree
Window.
Camera\Networketc.Panel

Network etc. panel when selected will display the
selected camera’s full MAC address, installed firmware/
hardwareversions,Modelnumber,andIPaddressassignment.
IPaddressisabutton.Clickittochangewhenthecameraisnotopenedforliveviewingoractivelyrecording
tochangetheCameraIPaddress.(AdministratorOnly)
Camera\Reboot/ResetPanel(AdministratorOnly)

Reboot/Reset
panelprovidestwobuttonsallowingtheAdministratortorebootthecurrentlyselectedcamera,or
resetallcamerasettingstofactorydefault(IPassignmentwill remainthesame).Wheneitherofthesebuttonsis
clicked,apop‐upwillappearrequesting“Yes/No”confirmationoftheactionbeforeitisperformed.
Camera\Camera
ParametersPanel(AdministratorOnly)

CameraParameterspanelprovidesafunctiontosaveallsettingsparametersforthecurrentlyselectedcameratoa
browsedfilelocation,orrestorecamerasettingsfromapreviouslysavedfile.
Thefilenamedefaultwillbethecameramodelfollowedbythedateandthefile
extension.avcs