Specifications

Page34of59|ArecontVisionAV200ManualRev1.1

Exposure\Day/NightPanel(AdministratorOnly)

Day/NightpanelallowsconfigurationofthedaynightfunctionforDNmodelcameras.
Thispanelisonly available whenaDNmodel camera is selected.For color onlymodel camerasthe panelwill be
grayedout
andnotavailable.
ThreemodescanbeselectedfromthepanelDay/NightModedropdownmenu:
 Automatic enables the camera to automatically switch from daylight to nighttime conditions and vice
versabasedontheThresholdsettings.
 Dayforcesdaymodeanddisablesnightmode.
 Nightforcesnightmode
anddisablesdaymode.
Switch Threshold adjusts theautomatic switchingof thecamera fromDay to Nightmode. The slider bar for this
optioncontrolswhenthecameraswitchesfromDay(color)intoNight(blackandwhite)mode.Valuessettowards
‐will cause the camera to switch to Night mode
when there is a higher illumination of the scene. Values set
towards+willcausethecameratostayinDaymodelongerrequiringagreaterdropinilluminationtoswitchinto
Nightmode.
ToggleGuardadjuststhelevelofbrightnessrequired toswitchfromNighttoDaymode.Valuesset
towards‐will
causethecameratoswitchtoDaymodewhenthereislower illuminationofthescene.Valuessettowards+will
cause the camera to stay in Night mode longer requiring a greater increase in illumination to switch into Day
mode.ToggleGuardshouldbeadjustedtoprevent
themodefromtogglingbetweenNightandDaymodesinareas
wheretransitionallightingexistsinthescene.
Exposure\BinningPanel(AdministratorOnly)

Binning panel controls the function of the Binning mode option on newer Arecont Vision model cameras. The
Binning panel will only be available for newer cameras incorporating this
function; this panel will be grayed out
and unavailableto camera models that do not support binning. Binning mode combines 2x2pixels on sensor to
improve low light performance. Low light sensitivity is improved by 4‐times as a larger pixel area is available to
collectlight.Thebinningmodealso
increasesSignaltoNoiseRatio(SNR)bytwo‐time.ThetradeoffwithBinningis
betweenlowlightperformanceandresolutionas when active binningmodewilldecreaseavailableresolutionby