Installation Manual

Arecont Vision SurroundVideo
®
Omni Installation Manual
Page | 13 [e-mail]
SurroundVideo® Omni
Changing the Lens
1. Remove the Dome Cover by loosening the captive fasteners as shown in Image 1.
2. Loosen the lens lock screw using a phillips head screwdriver (if necessary) as shown in Image 2. Only do
so if lens seems very tight when turning.
3. Manually unscrew the lens, this may take several seconds as shown in Image 3.
4. Replace lens as shown in Image 4.
5. Retighten the lock screw if necessary as shown in Image 5.
6. Reinstall Dome Cover per instructions outlined above as shown in Image 6.
Image 1 Image 2 Image 3
Image 4 Image 5 Image 6