User Manual

ArecontVisionSurroundVideo
®
OmniInstallationManual
Page | 11 [e-mail]
SurroundVideo®Omni
FocusingtheCameras
1. OpenaliveviewofthecamerafromyourwebbrowserortheAVSoftwareprovided(AV200).
2. Loosenthelenslockscrewusing aphillipsheadscrewdriver(ifnecessary).Onlydosoiflensseemsvery 
tightwhenturning.Lockscrewshouldbetightenedenoughtoprovidesomefriction
againstthelensto
avoidfocusingproblems.
3. Manuallyrotatethelenstoadjustthefocusuntilthedesiredimageisobtained.
4. Forsomelensesafocusshiftwilloccuroncethebubbleisinplace.Holdthebubbleuptothelenswhen
focusingtoaccountforthe
focusshiftorseethe“FocusingAlternateLenses”sectionbelowforfurther
instruction.
5. Retightenthelockscrewifnecessary.
6. InstalltheDomeCoverbyaligningthecaptivefastenerswiththematingthreadedholesonthecamera
housing.
7. WhenmountingtheDome CovertotheCameraHousingensurethat
thegasketisproperlyseatingand
notfolded.Failuretodosomayresultinwateranddustingress.

ChangingtheLens

1. RemovetheDomeCoverbylooseningthecaptivefasteners. 
2. Loosenthelenslockscrewusing aphillipsheadscrewdriver(ifnecessary).Onlydosoiflensseemsvery 
tightwhenturning.
3. Manuallyunscrewthelens,thismaytakeseveralseconds.
4. Replacelens.
5. Retightenthelock
screwifnecessary.
6. ReinstallDomeCoverperinstructionsoutlinedabove.






Tech
Tip