Installation Manual

Installation Manual
Page | 35 [e-mail]
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com [e-mail]
SurroundVideo® Omni G3
QoS – Quality of Service guarantees a certain level of a specified resource to selected traffic on a
network. A QoS-aware network prioritizes network traffic and provides a greater network reliability by
controlling the amount of bandwidth an application may use.
IPv4 – The MicroDome G2 supports the IPv4 internet-layer protocol for packet-switched
internetworking across multiple IP networks. IPv4 uses 32-bit addressing which allows for devices and
users on the internet for routing traffic.
802.1x – The IEEE 802.1x standard provides a general method for authentication and authorization in
IEEE-802 networks. Authentication is carried out via the authenticator, which checks the transmitted
authentication information using an authentication server and approves or denies access to the offered
services (LAN, VLAN or WLAN) accordingly.
Camera Preset Configurations
The Arecont Vision SurroundVideo
®
Omni G3 cameras support three predifined camera preset
configurations: 180 degree, 270 degree, and 360 degree. Also, the cameras support two custom preset
configurations.
- Home position
Four camera modules will move to the positions as the image shown in below. All four modules
zoom out to widest angle, and tilt up to zero degree.