Installation Manual

Installation Manual
Page | 45 [e-mail]
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com [e-mail]
SurroundVideo® Omni G3
AV IP Utility Focus/ Pan/ Tilt/ Zoom Tab
Menu Feature Description
Manual Focus:
+20, +5, +1, -20, -5, -1
Numbers indicate the level of Focusing in order to adjust
the field-of-view.
Full-range Focus
Best for scenes that are completely out of focus. The
camera automatically scans the full focus range of the
scene to find the best focus position.
Short-range Focus
Best for scenes that are slightly of out of focus. The
camera quickly fine-tunes for a precise focus position.
Stop Stops any command in progress.
Manual Pan:
+20, +10, +5, +1, -20, -10, -5,
-1
Numbers indicate the level of Pan in order to adjust the
field-of-view.
Manual Tilt:
+20, +10, +5, +1, -20, -10, -5,
-1
Numbers indicate the level of Tilt in order to adjust the
field-of-view.
Manual Zoom:
+20, +5, +1, -20, -5, -1
Numbers indicate the level of Zooming in order to adjust
the field-of-view.
NOTE: SurroundVideo® Omni G3 cameras are not to be used as traditional high speed PTZ cameras.
The motorized movement of the camera gimbals is meant for setup and configuration only. Movement
of the modules more than one time per day will void the warranty.
NOTE: Module CH2 will not pass the FRONT position shown on the mounting plate. This is to avoid
cable routing problems.
NOTE: Modules will stop moving once they hit the neighbor module during pan movement in either
direction