Spec Sheet

12MP and 20MP Models
No Touch Setup: 4 Individual Camera Gimbals Each with a Varifocal
Motorized Lens That Can be Remotely Setup in Any Position Around
a 360° Track
Preset Positions to Create a 36, 270°, or 180° Field of View, or Save
Custom Presets
SNAPstream
Advanced Compression Algorithm Reduces Bandwidth
without Impacting Image Quality
Forensic Zooming – Zoom Live or After the Event While Recording
Full Field-of-View in HD – Replace PTZ Devices
Series Features
SurroundVideo
®
Omni G3 IP Megapixel Cameras
Impact / Weather
Resistant IK-10 and
IP66 Rated
Dual Encoder
H.264/MJPEG
Pixel Binning
Mode
True Day/Night
with IR Cut Filter
Enhanced WDR
Wide Dynamic Range
on Select 12MP Models
Omni-Directional Track
with 4 Customizable
Sensors
OMNI
SNAPstream
Technology
Presets
180°/270°/360°
Custom Presets Motorized
Pan & Tilt Capable
Remote Setup
True Day/Night Functionality with Mechanical IR Cut Filter
Enhanced WDR
up to 120dB at Full Resolution: See Clearly in Shaded and
Bright Light Conditions Simultaneously on Select 12MP Models
Binning Mode for Strong Low Light Performance
Privacy Mask, Motion Detection, Flexible Cropping, Bit Rate Control,
Multi-Streaming, and Multicasting
Dual Encoder H.264/MJPEG
Network Protocols Include 802.1x, IPv4, DHCP, and More
PoE and Auxiliary Power: 18–48V DC/24V AC
Outdoor Rated IP66 and IK-10 Impact-Resistant Housing
12 or 20 Megapixel (MP) H.264 All-in-One Remote Setup Omni-Directional Remote-Congurable Multi-Sensor
True Day/Night Indoor/Outdoor Dome IP Cameras with SNAPstream
(Smart Noise Adaptation and Processing)
and Enhanced WDR
(Wide Dynamic Range) Models
The SurroundVideo
®
Omni G3 is an industry-game-changing rst-of-its-kind
omni-directional, remote-congurable, multi-sensor, multi-megapixel camera
built to provide outstanding high resolution video coverage for a wide range of
applications. The unmatched coverage and capabilities of the SurroundVideo Omni
G3 provides organizations of all sizes the exibility to deploy a surveillance camera
system that truly matches their current and future requirements for complete
situational awareness.
SurroundVideo Omni G3 is available with a choice of 12- or 20-megapixel (MP)
resolutions. The number of cameras required for a project can be dramatically
reduced with a single SurroundVideo Omni G3, thanks to its four customizable
remote sensor gimbals. Installation is fast and easy. Install the hinged mounting
plate, connect the PoE (Power-over-Ethernet) IP cable, and then remotely congure
the camera. Select a preset choice for 180°, 270°, or 360° views, or use the intuitive
interface to remotely pan, tilt, zoom, and focus each sensor. Two custom presets
created by the user can be saved to memory. The camera is integrated with the
industry’s leading VMS/NVR platforms.
SurroundVideo Omni G3 is ideal for applications with normal to challenging lighting
conditions. The Omni combines a day/night mechanical IR cut lter for the highest
image quality at any time of day. For applications with bright or over saturated
lighting conditions, Enhanced WDR
wide dynamic range delivers up to 120dB at
full resolution on select 12MP models. For applications with poor lighting conditions,
Binning Mode increases the camera’s low light performance by combining pixels so
that more light can be collected. SurroundVideo Omni G3 includes SNAPstream
(Smart Noise Adaptation and Processing) technology to reduce bandwidth without
impacting image quality. The camera offers advanced streaming capabilities and is
designed on an efcient H.264 encoding platform capable of delivering high quality
video without straining the network. Power can be supplied via a single PoE Class
3 compliant network cable or via an 18–48V DC/24V AC power supply.
SurroundVideo Omni G3 is designed for demanding environments, able
to operate indoors and out in an extended operational temperature range.
Certied to rigorous dust and water tests, the camera carries an IP66 rating.
The rugged dome housing is IK-10 rated to withstand the equivalent of 55 kg (120
lbs) of force for vandal-prone applications.
The camera interface or the AV IP Utility can be used for setup and updates, as
can many MegaLab
-certied VMS/NVR platforms. Using the camera interface
or the AV IP Utility
, security updates and both new or enhanced features can
be applied to the cyber-hardened SurroundVideo Omni’s Massively Parallel Image
Processing (MPIP) architecture. This in house developed architecture runs on the
Field Programmable Gate Array (FPGA) integrated circuit that is at the core of every
Arecont Vision camera. The SurroundVideo Omni G3 is ONVIF Prole S (Open
Network Video Interface Forum) compliant, providing interoperability between
network video products regardless of manufacturer.
MegaIP
Made in the USA
+1.818.937.0700 | www.arecontvision.com | avsales@arecontvision.com

Summary of content (4 pages)