Installation Manual

Arecont Vision H.264 Day/Night SurroundVideo
®
Series Installation Manual
5 | Page
9. Align the holes in the camera with the
prepared holes on the mounting surface.
Attach the camera with in-ceiling mount
housing to the surface mounting housing
shown in Image 4.
10. To insert camera with in-ceiling mount into
hard ceiling with the wood screws or any
optional hardware suitable for the mounting
surface shown in Image 10
. Image 10
Note: Use Flush Mount Adapter for false
ceiling tile installation. (Image 11) Please
refer to Flush Mount Adapter Installation
Instructions on page10.
Image 11
Adjusting Tilt, Pan and Focus:
10. Power on camera to adjust tilt, pan and focus.
11. To adjust the pan, use a #2 Phillips
screwdriver to loosen both screws on the
sides of the plastic gimbal bracket as shown
in Image 12 and Image 13.
12. Adjust the pan as required and tighten the
screw from step 11 shown in image 14.
Image 12 Image 13
Image 14
Set Screws
360
°
Wood Screws
Flush Mount
Adapter