Installation Manual

Arecont Vision H.264 Day/Night SurroundVideo
®
Series Installation Manual
6 | Page
13. To adjust the tilt, use a #2 Phillips screwdriver
to loosen both screws on the sides of the
plastic gimbal bracket 1/4 turn (Image 15 and
16). CAUTION: Do not remove the screws!
14. Adjust lens tilt as required and tighten the
screws from step 13 shown in image 17.
NOTE: the camera has 2-Axis gimbal with
360° pan and 100° tilt for easy and accurate
positioning.
Image 15
Image 16
Image 17
15. To adjust focus, loosen set screw on each
lens as shown in Image 18.
16. Adjust lens focus as required and tighten the
screws from step 15.
Image 18
Set Screws
Set Screws
100
°