Installation Manual

13
ConteraIP
®
Omni LX RS Installation Manual
4. Attach the pendant mount to the ceiling using the 4 wood screws are provided for mounting or
other optional hardware.
5. Run the ethernet cable and outside power cable (if necessary) through the rubber gasket which is
supplied through the pendant mount. Ensure the gasket is sealed properly.
6. Use the L-key to loosen the four torx-in screws which are provided to secure the dome cover.
7. Remove the dome cover and the protective foam in the middle. Do not remove the torx-in screws
from the dome cover.
8. Reattach the dome cover to the camera.
9. If the user chooses to use the configuration presets (180°, 270°, or 360°) for adjusting the arrow
on the template towards to the center of desired field of view. This will create the same center for
the field of view for the camera.