Installation Manual

32
ConteraIP
®
Omni LX RS Installation Manual
User can define custom pan/tilt/zoom positions as the image below.
1.
To control the camera preset configurations via the web interface:
a.
Double click the camera within the AV IP Utility (
image below).
b.
Open your preferred web browser and type the camera’s IP address (displayed inthe
image below)
2.
Click Presets Tab
NOTE: ConteraIP
®
Omni LX RS camera is not used as traditional high speed PTZ camera. The motorized
movement of the camera gimbals is meant for setup and configuration only. Movement of the modules
more than one time per day will void the warranty.
NOTE: Module CH2 will not pass the FRONT position shown on the mounting plate in order to avoid the
cable routing problems.
NOTE: Modules will stop moving once they hit the module next to it during pan movement in either
direction.
NOTE: Live video is disabled during pan/tilt adjustment.