Installation Manual

44
ConteraIP
®
Omni LX RS Installation Manual
AE Mode
(Auto Exposure
Mode)
Sync Brightness:
This option is available only if Global Mode is
enabled. If Sync Brightness is selected, the
Exposure Time Control and Gain Control are
the same for all four channels. Also, the
camera will be in LDR mode.
Auto:
If Auto is selected, each channel has
individual settings of the Exposure Time
Control and Gain Control.
AWB Mode
(Auto White
Balance Mode)
Auto:
Enables the automatic white balance feature of
camera, which will automatically remove
unrealistic color cast so that the color white is
rendered white in the image.
Off:
Select Off to disable AWB Mode.
Auto
Auto detects bright backlight, glare, or high
contrast lighting and automatically selects the
WDR level.
NOTE: WDR enabled will decrease the FPS of
20MP camera.
NOTE: Make sure AE mode is set to "Auto".
HDR
Manually adjusts the intensity of backlight
compensation.
NOTE: WDR enabled will decrease the FPS of
20MP camera.
NOTE: Make sure AE mode is set to "Auto".
Turn off in low
light
Disables WDR backlight compensation when
the light levels drop for better nighttime image
quality.
Turn off in B/W
Disables WDR backlight compensation when
the camera is in night mode for better nighttime
image quality.
DWDR
Digital WDR (DWDR) enhances the dark areas
by adjusting the gamma value. This will not
impact FPS of 20MP camera.
LDR
Will not combine long and short exposures into
one frame, resulting in better low light
performance.
Auto Exposure
Automatically adjusts illumination and exposure
values.
NOTE: Make sure AE mode is set to "Auto".