Installation Manual

50
ConteraIP
®
Omni LX RS Installation Manual
Network
Menu
Feature
Description
IP Assignment:
• DHCP
• IP Address
• Subnet Mask
• Default
Gateway
DHCP: If checked, the camera will
attempt to obtain its IP address from
the DHCP server available on the
network.
IP Address: Sets the current IP
address of the camera.
Subnet Mask: Once set, the camera
will use these mask bits to determine if
a destination is from a different
network.
Default Gateway: Once set, the
camera will send network traffic to the
specified gateway if the destination is
on a different network.
Port:
• HTTP
• Second HTTP
Port
• HTTPs
HTTP: The port default is 80. It is used
to access the camera via the web
browser.
Second HTTP Port: Sets an alternative
HTTP port. This port can be useful
when the standard HTTP port (80) is
not appropriate for this camera.
HTTPs: The port default is 443. It can
be used when you use HTTPs.
Port:
• Primary DNS
• Secondary
DNS
Configures the Primary and Secondary
DNS.
IPv6 Settings:
• Enable IPv6
• IPv6 Address
• Address
Prefix
• Default Route
• Router
Advertisement
• DNS
Enable IPv6: Enables IPv6 function.
Manually configures IPv6 address,
Address prefix, Default route, and DNS
server address.
Router Advertisement: Enables Router
Advertisement