Installation Manual

Arecont Vision MegaBall™ Installation Manual
12 | Page
MegaBall Accessories (Sold Separately)
Junction Box Adapter (SV-JBA) Installation Instruction
A. Junction Box Adapter
Inside the box:
B. Pack of four (4) machine screws
C. One double-sided hex key
D. Pack of four (4) wood screws and four (4)
dry wall anchors
E. Mounting template
• #2 Phillips screwdriver
Not included but needed:
• Wall Mount, MD-WMT
• ¾” NPT Conduit (if necessary)
Image 30
1. Remove junction box adapter and hardware
from the box
2. Remove the conduit plug by first removing the
socket set screw using the provided hex key (C)
as shown on Image 31.
3. Attach the junction box adapter to the wall
using drywall screws or any optional hardware
suitable for the mounting surface.
Image 31
Image 32
4. Attach the wall mount to junction box adapter
then attach cap to the wall mount as shown in
Image 32.
5. Connect ¾” NPT Conduit to the junction box
adapter.
6. Run Ethernet cable and outside power cable (if
necessary) through the Junction Box Adapter
and Wall Mount.
7. For installation of the camera, please reference
“Mounting the Camera.”
B
C
A
D
E
Conduit hole