Installation Manual

Arecont Vision MegaBall™ Installation Manual
6 | Page
Image 10: Close lens iris as necessary
14. For the fixed-focal model, adjust the focus by
loosening the two set screws on the front shell
as shown in Image 11 using the supplied
double sided hex key (Image 1G).
Image 11 Image 12
15. Adjust the lens adapter to focus the camera
as shown in Image 12. Retighten the set
screws once focusing is complete.
16. Remove the O-ring (Image 1D on Page 3)
from the bezel by pushing on the 4 drift pins
on the back of bezel shown in Image 13.
Dome Cover (Bubble) Installation (Optional):
17. Attach the provided dome cover (Image 1D
on Page 3) to the bezel as shown in Image
14.
Image 13
Image 14
18. Remove the protective film from the bubble.
NOTE: Take precaution not to scratch the
bubble.
19. Secure the dome cover to the camera using
the provided Security L-Key (Image 1H on
Page 3)
Drift Pin