Arecont Vision MegaBall™ Installation Manual 0|P a g e
Arecont Vision MegaBall™ Installation Manual MegaBall™ Wall Mount Version (-W) Installation Manual Inside the box: A. B. C. D. E. F. 3. Arecont Vision MegaBall™ camera with wall mount (indoor use only) CD with AV100 software and user manuals (license key required for recording) Mounting template Pack of three (3) wood screws and three (3) dry wall anchors One double-sided hex key (fixed focal lens version only) Security L-Key Plug the Ethernet cable into the MegaBall™ PoE female RJ45 connector.
Arecont Vision MegaBall™ Installation Manual Adjusting the Tilt, Pan, Z-Axis (yaw): 6. To adjust the camera tilt, pan or z-axis (yaw), loosen the ring on the wall mount bracket as shown in Image 3 then adjust as necessary and retighten the ring. installation practices are not covered under warranty! Adjusting the Focus, Iris and Field of View: 7. For the vari-focal model, adjust the focus, iris and field of view using the provided Security L-Key (Image 1F) as shown in Image 5.
Arecont Vision MegaBall™ Installation Manual MegaBall™ Dome Version (-D) Installation Manual Inside the box: Arecont Vision MegaBall™ camera with inceiling mount (indoor use only) B. Surface mount (preassembled on dome) C. O-ring (preassembled on bezel) D. Dome cover (Bubble) E. CD with AV100 software and user manuals (license key required for recording) F. Security L-Key G. One double-sided hex key (fixed focal lens version only) H. Pack of three (3) wood screws and three (3) dry wall anchors J.
Arecont Vision MegaBall™ Installation Manual 5. Using the provided Security L-key (Image 1F), loosen the three (3) screws securing the dome cover (Image 3). Remove the vandal resistant dome cover. NOTE: Do not remove the screws from the dome cover. In-ceiling Mount Installation (Optional) 7. 8. 9. Image 3 6. Loosen the three (3) machine screws (Image 4) and remove the in-ceiling mount camera from the surface mount housing. (Image 4) Using the mounting template, cut a hole in the surface for mounting.
Arecont Vision MegaBall™ Installation Manual Adjusting the Tilt, Pan, Z-Axis (Yaw): Adjusting the Focus, Iris and Field of View: 12. 13. To adjust the camera tilt, pan or z-axis (yaw), loosen the 3 set screws on the in-ceiling mount as shown in Image 6. Then adjust as necessary and retighten the 3 set screws. For the vari-focal model, adjust focus, iris and field of view using the provided Security L-Key (Image 1F) as shown in Image 8. Set Screw Focus Zoom Iris Image 6 14.
Arecont Vision MegaBall™ Installation Manual Dome Cover (Bubble) Installation (Optional): Optional: Connecting Digital I/O: 16. 20. 17. Remove the O-ring (Image 1C) from the bezel by pushing on the 4 drift pins on the back of bezel shown in Image 11. Attach the provided dome cover (Image 1D) to the bezel as shown in Image 12. To use the digital I/O, connect the digital I/O to the pigtail cable connector as shown in Image 2.
Arecont Vision MegaBall™ Installation Manual Camera Installation: 21. 22. Install the AV100 application manager Software. (Image 13, found on the CD). 24. NOTE3: User can verify camera model number and FW version of all cameras as shown in Image 16. Run the AV100 application manager by double clicking on the icon shown below. (Image 14, found on your desktop). Image 13 23. the IP address. See “AV100 Installation Manual” (found on the CD) for details on Advanced Mode.
Arecont Vision MegaBall™ Installation Manual Image 17 28. When all cameras are discovered and installed and display “Installed, online”, select “Save/Exit.” The AV100 application main menu will appear. 29. From the “AV100 Application Manager” menu, select “Run” next to “Live video” to view live images. NOTE: See the “AV100 Installation Manual” (found on CD) for details on camera configurations.
Arecont Vision MegaBall™ Installation Manual R 1|P a g e
