User manual Fokker DVII Ares

QUICK-START GUIDE
Full manual available to download from: www.Ares-RC.comFull manual available to download from: www.Ares-RC.com
1
Carefully remove the transit tape
and the foam retainers, then gently
lift your Fokker D.VII and the other
components from the box.
This Quick Start guide is written for the RTF (Ready to Fly) version of the Fokker D.VII.
A full instruction manual is available to download from www.ares-rc.com
Ensure you have the following
parts:
• 100% Factory assembled Fokker D.VII
• 4-channel transmitter with integral 100mA charger
• 70mAh 3.7V 1S Li-Po battery
• 4x AA cells
2
Remove the transmitter battery
cover and insert the four AA
alkaline cells.
3
Open the hatch on the lower left
corner of the transmitter, locate
the charge lead and connect it to
the 70mAh Li-Po, making sure to
align the red dots.
4
With the battery correctly
connected the CHG (charge) light
on the transmitter will glow solid
yellow indicating that its charging.
Note that it is not necessary to
switch the transmitter on to initiate
charging.
RTF