Ethos FPV User Manual

20
“A” Button
start/stops video
recording
“C” Button takes a
still photo with each
press
Videorecordingiscontrolledfromthe2.4GHztransmier.Tostartvideo
recording,pressthe“A”buon.Tostoprecording,pressthebuon
again.WhenrecordingbeginsacounterisdisplayedontheFPVscreen
to indicate recording has
begun. The counter indicates
themethattherecorderhas
beenrunning.Totakeasll
photo,pressthe“C”buonfor
eachphotothatyouwantto
take.Eachmethebuonis
pressed the screen blinks while
the photo is being recorded
and returns when complete.
Camera Control from Tx
RemovetheMicroSDcardfrom
the FPV camera and insert into the
included USB card reader. Insert
the card reader into the USB port
onyourcomputertoaccessthe
foldersthatcontainyourvideos
and photos. It is best to download
thelestoyourcomputerbefore
aempngtoviewthevideos.
Videoperformancedirectfromthe
MicroSDcardmaybechoppy.
Downloading Video & Photos
IMPORTANT INFORMATION
Thecameradoesnothavealowvoltagecuto(LVC)andwilldrainthe
ightbaerytobelowcricallevels,damagingthempermanently.ALWAYS
unplugboththeightbaeryandthebalanceplugaeryingtoprevent
damage.