User Manual

QUICK-START GUIDE
Full manual available to download from: www.Ares-RC.comFull manual available to download from: www.Ares-RC.com
1
Carefully remove the transit tape
and the foam retainers, then gently
lift your SPAD S.XIII and the other
components from the box.
This rst half of the Quick Start Guide is written for the RTF (Ready to Fly) version of the
SPAD S.XIII. A full instruction manual is available to download from www.ares-rc.com.
Ensure you have the following
parts:
• 100% Factory assembled SPAD S.XIII
• 4-channel transmitter with integral 100mA charger
• 70mAh 3.7V 1S Li-Po battery
• 4 x AA cells
2
Remove the transmitter battery
cover and insert the four AA cells.
3
Open the hatch on the lower left
corner of the transmitter, locate
the charge lead and connect it to
the 70mAh Li-Po, making sure to
align the red dots.
4
With the battery correctly
connected the CHG (charge) light
on the transmitter will glow solid
yellow indicating that the LiPo
is charging. Note that it is not
necessary to switch the transmitter
on to initiate charging.
RTF