User's Manual

A wrong battery placement
may cause batteries overheat.
+
-
Battery compartment cover
2 * AAA batteries
Receiver
Wheel button
Power on/off switch
Receiver
Battery cover
Mode button
Mouse
Internet Forward &
Backward button
LED indicator
Features
Benefits of Virtual Touch Mouse
Introduction
A. Hardware Installation
1. Insert the batteries
System Requirements
a. Remove the battery cover and insert new batteries.
b. Move the power switch to the ON position.
c. The Low Power red LED on the left side will be on for 6 seconds after the mouse power is
switched to on.
2. Connect the receiver
1. Installation
a. Turn on your PC.
b. Connect the receiver to the USB port on PC.
c. Please wait for a while for the PC to detect the receiver device. (The waiting time depends on PC
hardware.)
Congratulations on your purchase of the most innovative mouse, “Virtual Touch mouse”. The
Virtual Touch mouse features and integrates the advantages of the patented technology of
traditional mouse and the up-to-date touch screen technology, enabling users to operate
touch screen functions on Windows 8 by just mouse button click and mouse move-
ment, without fingers touching on screen. It is designed to make you more productive and
more comfortable.
2.4G Hz (distance 6~8m), 34 Channels 2
24
ID
Patented and state-of-art emulating touch screen technology
2-in-1 design : a traditional mouse with touch screen functions for Windows 8
To emulate touch screen behaviors by just mouse button click and mouse movement.
Two switchable modes:
1. standard mouse mode ----- for traditional mouse functions
2. Virtual-Touch mode ----- to emulate touch screen functions, with the Virtual Touch Driver
installed.
Longer battery life
800/1600 dpi switchable (simultaneously press the middle button and right button for 3 seconds
to change dpi), default at 1600dpi
To relieve hands fatigue from arm arising and finger touching on screen.
To achieve the same functions of touch screen without finger touching on the screen.
To operate the touch screen functions in a remote distance.
Desktop and Notebook users can also experience the touch screen functions even with a
non-touch screen monitor.
To keep screen always clean. No need to touch the screen with finger tips.
For standard mouse mode : Windows XP/Vista/7/8, and Mac OS 10.6 or higher
For Virtual Touch mouse mode: Windows 8 only. [Not available for Windows RT]
USB Port
PC
USB port
Pull out
the receiver
B. Software Installations
To activate the Virtual Touch mode functions, please insert the accompanied CD into your
computer, or download the Virtual Touch Driver from your local brand vendor's website.