2.
Introduction Congratulations on your purchase of the most innovative Hyper-Fast Scrolling wireless mouse. With an incredible sensitivity to surface details and high tracking speed than other mice, the mouse can track reliably even on tricky polished or wood-grain surfaces. It offers even more advance that will make you more productive and more comfortable. Product Features 2.4GHz (distance 6~8m), 16 Channels The state-of-the-art optical technology.
Battery cover Power ON/OFF Switch Nano Receiver Operation 1. Insert the batteries a. Lift the battery cover up. b. Insert Alkaline battery AAA x 2pcs. Please ensure the batteries’ polarities (+/-) match the battery compartment’s polarities. c. Close the battery cover. d. Switch the Power on-off switch on the bottom of the mouse to the ON position. e. The Low Power LED on the top case will be on for 6 seconds when the power is switched on.
(ǃ) Note: The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, "to click any button of the mouse" is compulsory to wake it up. Power On/Off: To save energy for long period of non-usage, switch the On/Off button to Off position to turn off the mouse. Users can press the DPI button to change the resolution. The LED will flash once or twice when dpi has been successfully switched to 800 or 1600 dpi. 2. Connect the receiver a. Turn on your PC. b.
4. Scrolling Mode Standard scroll mode: When switched to the standard scroll mode, the wheel can scroll at normal speed with a feeling of click-to-click, which gives you the precision you need to when navigating lists, sides and images. Hyper-Fast Scroll mode: When switched to the Hyper-Fast Scroll mode, the wheel can scroll very fast through long documents or webpages. Hyper-Fast Scroll Wheel To switch between the two scroll modes 5.
System Requirements Microsoft Windows 7 / 8 /10 or MAC OS X (Button functions may differ on a MAC). USB Port Trouble Shooting 1. Make sure you have put the batteries in correction directions, and power switch is ON. 2. Make sure you have connected the receiver correctly to the computer's USB port. 3. Try another USB port, in case that your USB port is loose. 4. Replace new batteries if needed when the battery power is low. 5.
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
