2.
Introduction Congratulations on your purchase of the most innovative wireless optical mouse. With an incredible sensitivity to surface details and high tracking speed than other mice, the mouse can track reliably even on tricky polished or wood-grain surfaces. It offers even more advance that will make you more productive and more comfortable. Product Features 2.4GHz (distance 6~8m), 16 Channels The state-of-the-art optical technology. Vertical Scroll Wheel and 3 buttons Nano receiver.
Battery Power ON/OFF Switch cover Nano Receiver Operation 1. Insert the batteries a. Lift the battery cover up. b. Insert Alkaline battery AAA x 2pcs. Please ensure the batteries’ polarities (+/-) match the battery compartment’s polarities. c. Close the battery cover. d. Switch the Power on-off switch on the bottom of the mouse to the ON position. e. The Low Power LED on the top case will be on for 6 seconds when the power is switched on.
(ǃ) Note: The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, "to click any button of the mouse" is compulsory to wake it up. Power On/Off: To save energy for long period of non-usage, switch the On/Off button to Off position to turn off the mouse. 2. Connect the receiver a. Turn on your PC. b. Plug the receiver into the USB port on PC. 3. Communication : the mouse & the receiver a. Make sure the Power On/Off Switch on the bottom of the mouse is ON. b.
Trouble Shooting 1. Make sure you have put the batteries in correction directions, and power switch is ON. 2. Make sure you have connected the receiver correctly to the computer's USB port. 3. Try another USB port, in case that your USB port is loose. 4. Replace new batteries if needed when the battery power is low. 5. If mouse performance is slow or intermittent around a wireless network, unplug the Nano receiver from the USB port and then re-insert it.
communications. However, there is no guarantee that interference will not occur in a particular installation if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
